Black plate (37,1)
<XRD7106-A/N>37
Adjusting initial settings
1
Usingthe initial settings, you can customize
varioussystem settings to achieve optimal per-
formancefrom this unit.
1Functiondisplay
Showsthe function status.
1 PressSOURCE and hold until the unit
turnsoff.
2 PressFUNCTION and hold until the
clockappears in the display.
3 PressFUNCTION to select one of the in-
itialsettings.
PressFUNCTION repeatedly to switch be-
tweenthe following settings:
ClockFMStep (FM tuning step)AM Step
(AMtuning step)Warning (warning tone)
AUX(auxiliary setting)Dimmer (dimmer)
Brightness(brightness)REAR SP (rear
outputand subwoofer controller)Telephone
(soundmuting/attenuation)Ever Scroll (ever
scroll)
Usethe following instructions to operate each
particularsetting.
#Tocancel initial settings, press BAND.
#Youcan also cancel initial settings by holding
downFUNCTION until the unit turns off.
Setting the clock
Usethese instructions to set the clock.
1 PressFUNCTION to select clock.
PressFUNCTION repeatedly until clock ap-
pearsin the display.
2 Presscor dto select the segment of
theclock display you wish to set.
Pressingcor dwill select one segment of the
clockdisplay:
HourMinute
Asyou select segments of the clock display
thesegment selected will blink.
3 Pressaor bto set the clock.
Pressingawill increase the selected hour or
minute.Pressing bwill decrease the selected
houror minute.
Setting the FM tuning step
TheFM tuning step employed by seek tuning
canbe switched between 100 kHz, the preset
step,and 50 kHz.
1 PressFUNCTION to select FM Step.
PressFUNCTION repeatedly until FM Step ap-
pearsin the display.
2 Presscor dto select the FM tuning
step.
Pressingcor dwill switch the FM tuning
stepbetween 100 kHz and 50 kHz. The se-
lectedFM tuning step will appear in the dis-
play.
Initial Settings
En 37
English
Section
09