Introduction of audioadjustments
1
1Audiodisplay
Showsthe audio adjustments status.
%PressAUDIO to display the audio func-
tionnames.
PressAUDIO repeatedly to switch between
thefollowing audio functions:
Fad(balance adjustment)EQ (equalizer
curveadjustment)Bass (bass and treble
leveladjustment)Loud (loudness)
Sub-W1(subwoofer on/off setting)/NonFad
(nonfading output on/off setting)Sub-W2
(subwoofersetting)/NonFad (non fading out-
putsetting)HPF (high pass filter)SLA
(sourcelevel adjustment)ASL (automatic
soundlevelizer)
#IfEQ-EX function has been selected and only
whenEQ-EX is turned on and CUSTOM is se-
lectedas the equalizer curve, you can switch to
Bass.
#Whenthe subwoofer controller setting is only
PREOUT:FULL, you cannot switch to Sub-W1.
(Referto page 43.)
#Youcan select the Sub-W2 only when sub-
wooferoutput is turned on in the Sub-W1.
#Whenthe subwoofer controller setting is only
PREOUT:FULL, you can switch to the non fading
outputon/off setting. (Refer to page 43.)
#Youcan select the non fading output setting
onlywhen non fading output is turned on in the
nonfading output on/off setting.
#Whenselecting the FM tuner as the source,
youcannot switch to SLA.
#Toreturn to the display of each source, press
BAND.
Note
Ifyou do not operate the audio function within
about30 seconds, the display is automatically re-
turnedto the source display.
Compensating forequalizer curves (EQ-EX)
TheEQ-EX function smoothes the effects of
eachequalizer curve. Furthermore, you can
adjustbass and treble for each source when
CUSTOMcurve is selected.
!IfSFEQ has been previously selected, press
EQ-EXand hold to switch to EQ-EX and
EQ-EXindicator appears in the display.
%PressEQ-EX to turn EQ-EX on.
EQ-EXON appears in the display. EQ-EX is
nowon.
#Toturn EQ-EX off, press EQ-EX.
Setting the sound focusequalizer (SFEQ)
Clarifyingthe sound image of vocals and in-
strumentsallows the simple staging of a nat-
ural,pleasant sound environment. Even
greaterlistening enjoyment will be obtained if
seatingpositions are chosen carefully. FRT1
booststhe treble on the front output and the
basson the rear output. FRT2 boosts the treble
andthe bass on the front output and the bass
onthe rear output. (The bass boost is the
samefor both front and rear.) For both FRT1
andFRT2,Hsetting provides a more pro-
nouncedeffect than Lsetting.
Audio Adjustments
En 35
English
Section
08