Setting Up the Environment for Use
Switching the Auto PI Seek
During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF. (Refer to “PI Seek function” on page 30.)
•Press the FUNCTION button 5 on General Environment Setting Screen switches the Auto PI Seek ON/OFF.
Changing the FM Tuning Step
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to 100 kHz when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
•Press the FUNCTION button 6 on General Environment Setting Screen selects the desired tuning step.
Note:
•The tuning step remains set at 50 kHz during Manual tuning.
•The tuning step returns to 100 kHz if the battery is temporarily disconnected.
Returns to the Initial Setting Screen
•Press the RETURN button.
The display returns to Initial Setting Screen.
21
