Pioneer DV-420V-K Before you start What’s in the box, Loading the batteries in the remote control

Before you start

What’s in the box

Remote Control

Audio/video cable

AA batteries (R6) x 2

Warranty card

Operating instructions (this document)

Loading the batteries in the remote control

1 Open the back cover.

Press lightly on this part and slide into the direction of the arrow.

2Insert the included batteries (two size AA batteries).

Insert the batteries in the proper direction, as indicated by the  and marks inside the case.

Insert one at a time from the top.

3 Close the back cover.

Close the cover securely (a click should be heard).

Section

01

English

Notes

Do not use any batteries other than the ones specified. Also, do not use a new battery together with an old one.

When loading the batteries into the remote control, set them in the proper direction, as indicated by the polarity marks (and ).

Do not heat batteries, disassemble them, or throw them into flames or water.

Batteries may have different voltages, even if they are the same size and shape. Do not use different types of batteries together.

To prevent leakage of battery fluid, remove the batteries if you do not plan to use the remote control for a long period of time (1 month or more). If the fluid should leak, wipe it carefully off the inside of the case, then insert new batteries. If a battery should leak and the fluid should get on your skin, flush it off with large quantities of water.

When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country/area.

WARNING

Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or performance of batteries.

En 7