Blackplate (40,1)
40 CRD3580-A/N
1 PressDSP to select the sound field
control.
PressDSP until SFC appears in the display.
#Ifthe sound field control has been previously
setto a sound field program then the title of that
previouslyselected sound field program will be
displayed,such as STUDIO,JAZZ,CLUB,OCT1,
OCT2,orBBE.
2 Selecta sound field program by
pressing16.
Selectthe desired sound field program by
pressingone of the numbered buttons, from
16,which correspond to the different sound
fieldprograms as listed above.
#Youcan also sequentially select a sound field
programby pressing cor d.

Adjusting BBE sound level

WithBBE sound processing technology, you
canadjust the level of BBE.
1 RecallBBE.
SeeRecalling sound field programs on the pre-
viouspage.
2 Pressaor bto adjust the level of
BBE.
Eachpress of aor bincreases or decreases
thelevel of BBE.
+44is displayed as the level is increased
ordecreased.
Using the position selector
Oneway to assure a more natural sound is to
clearlyposition the stereo image, putting you
rightin the center of the sound field. Theposi-
tionselector adjusts the volume level of sound
fromeach speaker to match seat positions
andthe number of people in the car and lets
yourecall settings at the touch of a button.
Hereis a list of the positions:
Button Display Indicator Position
aFRONT Frontseat
bALL Allseats
cFRONT-L Frontseat left
dFRONT-R Frontseat right
1 PressDSP to select the position
selector.
PressDSP until POSI appears in the display.
#Ifthe position selector has been previously
setto a listening position then the title of thatpre-
viouslyselected listening position will be dis-
played,such as FRONT,ALL,FRONT-Lor
FRONT-R.
2 Pressc/d/a/bto select a listening
position.
Pressone of these, c/d/a/b, to select a lis-
teningposition as listed in the table.
#Tocancel the selected listening position,
pressthe same button again.
#Whenthe rear output setting is subwoofer,
youcannot select ALL. Refer to Switching the rear
outputsetting on page 43.
Digital Signal Processor
09
En
40
Section