Blackplate (36,1)
36 CRD3580-A/N
2 Pressaor bto adjust front/rear
speakerbalance.
Eachpress of aor bmoves the front/rear
speakerbalance towards the front or the rear.
FADER:F25 FADER :R25 is displayed as the
front/rearspeaker balance moves from front to
rear.
#FADER: 0 is the proper setting when only
twospeakers are used.
#Whenthe rear output setting is subwoofer,
youcannot adjust front/rear speaker balance. Re-
ferto Switching the rear output setting on page
43.
3 Presscor dto adjust left/right
speakerbalance.
Whenyou press cor d,BAL : 0 is displayed.
Eachpress of cor dmoves the left/right
speakerbalance towards the left or the right.
BAL:L25 BAL :R25 is displayed as the left/
rightspeaker balance moves from left to
right.
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 PressAUDIO to select LOUD.
PressAUDIO until LOUD appears in the dis-
play.
2 Pressato turn loudness on.
LOUD:ON appears in the display.
3 Pressbto turn loudness off.
LOUD:OFF appears in the display.
Note
Youcan also turn loudness on or off by pressing
LOUD.
Adjusting source levels
SLA(Source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the volume level of the
FMtuner, which remains unchanged.
1 Comparethe FM tuner volume level
withthe level of the source you wish to
adjust(e.g., built-in CD player).
2 PressAUDIO to select SLA.
PressAUDIO until SLA appears in the display.
3 Pressaor bto adjust the source
volume.
Eachpress of aor bincreases or decreases
thesource volume.
SLA:+4 SLA :4is displayed as the source
volumeis increased or decreased.
Notes
!Sincethe FM tuner volume is the control, it
isnot possible to apply source level
adjustmentsto the FM tuner.
!TheAM tuner volume level can also be
adjustedwith source level adjustments.
!Thebuilt-in CD and the multi-CD players are
bothset to the same source level adjustment
volumeautomatically.
!Externalunit 1 and External unit 2 are both
setto the same source level adjustment
volumeautomatically.
Audio Adjustments
08
En
36
Section