Blackplate (7,1)
7 CRD3580-A/N

Removing the front panel

1 PressDETACH to release the front
panel.
PressDETACH and the left side of the panel is
releasedfrom the head unit.
DETACHbutton
2 Grabthe front panel and remove.
Grabthe left side of the front panel and pull
awayto the right. The front panel will bede-
tachedfrom the head unit.
3 Putthe front panel into the
protectivecase provided for safe keeping.

Attaching the front panel

1 Placethe front panel flat against
thehead unit.
2 Pressthe front panel into the face
ofthe head unit until it is firmly seated.
Resetting themicroprocessor
Themicroprocessor must be reset under the
followingconditions:
!Priorto using this unit for the first time after
installation
!Ifthe unit fails to operate properly
!Whenstrange or incorrect messages appear
onthe display
1 Removethe front panel.
SeeRemoving the front panel on this page.
2 PressRESET on thehead unitwith a
pentip or other pointed instrument.
RESETbutton
About the XM READY mark
TheXM READY mark printed on thefront pa-
nelindicates that the Pioneer XM tuner (sold
separately)can be controlled by this unit.
Pleaseinquire to your dealer or nearest
authorizedPioneer service station regarding
theXM tuner that can be connected to this
unit.For XM tuner operation, please refer to
theXM tuner owner s manual.
Notes
!XMSatellite Radio is developing a new band
ofradio in the U.S.A.
Before YouStart 01
En 7
English
Section