Blackplate (12,1)
12 CRD3580-A/N
Listening to the radio

1 3

2
5

467

6
8
5
7
Theseare the basic steps necessar y to operate
theradio. More advanced tuner operationis
explainedstarting on page 14.
1Bandindicator
Showswhich band the radio is tuned to, AM
orFM.
2Stereo(5) indicator
Showsthat the frequency selected is being
broadcastin stereo.
3Frequencyindicator
Showsto which frequency the tuner is
tuned.
4SOURCEbutton
Pressto select the tuner as the source.
5BANDbutton
Pressto select among three FM and one
AMband.
6c/dbuttons(Manual or seek tuning)
Pressto tune in a radio station.
7VOLUMEbutton
Pressto increase or decrease the volume.
8TUNERbutton
Pressto select the tuner as the source.
1 PressSOURCE on the head unit, or
TUNERon the remote, to select the tuner.
PressSOURCE or TUNER until you see Tuner
displayed.
2 UseVOLUME to adjust the sound
level.
Whenyou press VOLUME up/+, the volume is
raisedand when pressed down/, the volume
islowered.
3 PressBAND to select a band.
PressBAND until the desired band is dis-
played,F1,F2,F3 for FM or AM.
4 Toperform manual tuning, press c
ordwith quick presses.
Thefrequencies move up or down step by
step.
5 Toperform seek tuning, press and
holdcor dfor about one second and
release.
Thetuner will scan the frequencies untila
broadcaststrong enough for good reception is
found.
Tuner
04
En
12
Section