Changing the settings
The factory default settings are indicated in italic.
1Press SETUP to show the Initial Setup screen.2Use / to select the setting, then press ENTER.
3Follow the descriptions on the main display to change the setting.Settings | What it does | |
Display Setting | Dims or brightens the display. | |
(Level3/Level2/Level1) |
| |
|
|
|
Network | Network Configuration | Network setting, see page 19. |
|
| |
| network can be changed. | |
| Friendly Name | The name of this system displayed on a computer or other device connected to the |
Setting |
|
|
|
|
|
Option | BT PIN Select | Use this to set up the Bluetooth PIN code. (page 13) |
(0000/1234/8888) |
| |
|
| |
|
|
|
Setting | Internet Parental Lock | Restricts usage of internet radio using password. Select Internet Parental Lock to On/ |
(Change Password/Internet | Off. (page 20) | |
| Parental Lock) | You can set up the password from Change Password. (page 20) |
|
|
|
| Power Off Setting | Auto Power Off, see page 20. |
| (Auto Power Off/Quick Start | Quick Start Mode, see page 20. |
| Mode) |
|
|
|
|
| Language | Change the language of the operation messages displayed on the main display. |
| (English/Other languages) | Other languages: French, German, Netherlands, Italian, Spanish, Russian, Japanese |
|
|
|
| Software Update | Use this to update this unit software. |
|
| |
System Info | Use this to check this unit information details. | |
|
| Please check the following items: |
|
| LAN connection status, MAC Address, IP Address, Gateway Address, Proxy Server |
|
| setting, Subnet Mask. Also confirm that this unit’s software version (Release ID) is up to |
|
| date. |
|
| |
Reset | Use this procedure to reset all settings to the factory default. | |
|
|
|
If a broadband router (with
It is advised that you also refer to the operation manual supplied with your network component.
•Any changes made to a router without the DHCP server function must be reflected to unit network settings.
1 Press SETUP.The Initial Setup screen is shown on the main display.
2Select Network Setting NetworkConfiguration.
| Network Setting |
|
|
|
|
| |
| | ||
| Network Configuration |
|
|
| Friendly Name |
|
|
|
| | |
|
|
|
|
09
3Use / to select DHCP Off, then pressENTER.
The IP address setting screen is displayed.
4 Use /// or number buttons to | English | |||||
| ||||||
adjust the numbers, then press ENTER. |
| |||||
|
|
|
|
|
|
|
|
| Static IP Address |
|
|
| |
|
|
|
|
| ||
|
| Français | ||||
|
| |
|
| ||
|
| |
|
|
| |
|
| 192 | . 168 . 2 . | 4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Español |
|
|
|
|
|
|
• Using / moves the adjusting digit.
• Using / increase or decrease the values.
Static IP AddressThe IP address to be entered must be defined within the following ranges. If the IP address defined is beyond the following ranges, you cannot play back audio files stored on components on the network or listen to Internet radio stations.
Class A: 10.0.0.1 to 10.255.255.254 / Class B:
172.16.0.1to 172.31.255.254 / Class C: 192.168.0.1 to 192.168.255.254
Subnet MaskIf an xDSL modem or a terminal adapter is directly connected to this unit, enter the subnet mask listed in your ISP documentation. In most of the cases, enter 255.255.255.0.
Gateway addressIn case a gateway (router) is connected to this unit, enter the corresponding IP address.
Preferred DNS/Alternate DNSIf there is only one DNS server address listed in your ISP documentation, enter Preferred DNS. In case there are more than two DNS server addresses, enter Alternate DNS in the other DNS server address field.
19
En