09Changing the settings
Proxy Setup
Select Use Proxy Server when you connect this unit to the Internet via a proxy server. Enter the IP address of your proxy server in the Proxy Server Address field. Also, enter the port number of your proxy server in the ‘Proxy Port’ field.
Friendly Name
1Press SETUP.
2Select Network Setting Friendly
Name.
3Use ///to enter Friendly Name, then press ENTER.
•/ : Moves the adjusting digit.
•/ : Changes displayed character.
•SOUND : Switches character types.
•CLEAR : Deletes one characters at a time.
Parental lock setup
Restrict internet radio access for children. When Internet Parental Lock is set to On, you cannot listen to internet radio without entering the password.
Note
•Even if Internet Parental Lock is set to On, automatic clock adjustment using network will work.
Turn on/off the parental lock
1 Press SETUP.
The Initial Setup screen is displayed on the main display.
2Select Option Setting Internet
Parental Lock Internet Parental Lock.
3Use /// or number buttons to enter the password, then press ENTER.
•/ : Moves the adjusting digit.
•/ : Increase or decreases the numbers.
•CLEAR : Deletes one characters at a time.
•The factory default setting is "0000".
4Use / to select On or Off, then press
ENTER.
Changing the password
1 Press SETUP.
The Initial Setup screen is displayed on the main display.
2Select Option Setting Internet Parental Lock Change Password.
3Use /// or number buttons to enter the current password, then press
ENTER.
4Use /// or number buttons to enter the new password, then press ENTER.
•If you press RETURN, the previous screen will be displayed.
Software Update
Use this procedure to update the unit’s software. You can update the software via a USB storage device.
Updating via a USB storage device is performed by downloading the update file from a computer, reading this file onto a USB storage device then inserting the USB storage device into the USB port on the unit’s front panel.
•If an update file is provided on the Pioneer website, download it onto your computer. When downloading an update file from the Pioneer website onto your computer, the file will be in ZIP format. Unzip the ZIP file before saving it on the USB storage device. If there are any files or folders on the USB storage device, delete them.
Important
•DO NOT unplug the power cord during updating.
•When updating via a USB storage device, do not disconnect the USB storage device.
1 Press SETUP.
The Initial Setup screen is displayed on the main display.
2Select Option Setting Software Update Start, then press ENTER.
Software Update
Start
Cancel
3 To update, press ENTER.
The display will temporarily disappear, and after about twenty seconds, the update menu will be displayed and update will begin.
•When the update is completed, the unit will automatically reboot.
Software Update error messages
Status | Descriptions | |
messages | ||
| ||
|
| |
File Not | No update file was found on the USB | |
Found. | storage device. Store the file in the USB | |
| storage device’s root directory. | |
|
| |
|
| |
|
|
Power Off settings
Make settings to control the power ON/OFF mode.
Changing the Auto Power Off function setting
The factory default setting for the Auto Power Off function is On. As a result, when no action is performed for thirty minutes, the unit will automatically turn Off. This setting can be changed as follows:
1 Press SETUP.
The Initial Setup screen is displayed on the display.
2Select Option Setting Power Off Setting Auto Power Off.
3Use / to select On or Off.
Changing the Quick Start Mode
When this is set to On, the time required for bootup will be shortened. In addition,
1 Press SETUP.
The Initial Setup screen is displayed on the display.
2Select Option Setting Power Off Setting Quick Start Mode.
3Use / to select On or Off.
Resetting the system
Use this procedure to reset all system settings to the factory default.
Important
•Disconnect all components connected to this unit before the operation.
1 Press SETUP.
The Initial Setup screen is displayed on the display.
2Select Reset from the Initial Setup screen, then press ENTER.
The display shows Reset?.
3 To reset settings, press SETUP.
The unit turns off (standby mode).
All the settings will be reset to the factory default next time the unit is turned on.
20
En