10Additional information

Wireless LAN

Problem

Check

Remedy

Network cannot be

Wireless LAN converter’s power is

Check that the USB cable connecting the wireless LAN

accessed via wireless

not on. (Wireless LAN converter’s

converter to the player’s DC OUTPUT for WIRELESS LAN

LAN.

Power, WPS and Wireless

terminal is properly connected (page 8).

 

indicators are not all lit.)

 

 

 

 

 

Error 8 is displayed on the unit’s

There is a problem with the wireless LAN converter’s power

 

display window.

supply. Turn the unit’s power off, then disconnect the USB

 

 

cable, reconnect the USB cable and turn the unit’s power

 

 

back on.

 

 

 

 

 

If Error 8 is still displayed after repeating the above

 

 

procedure several times, there is a problem with the unit or

 

 

the USB cable. Unplug the unit from the wall and call a

 

 

Pioneer authorized independent service company.

 

 

 

 

The LAN cable is not firmly

Firmly connect the LAN cable (page 7).

 

connected.

 

 

 

 

 

Wireless LAN converter and base

Improve the wireless LAN environment by moving the

 

unit (wireless LAN router, etc.) are

wireless LAN converter and base unit closer together, etc.

 

too far apart or there is an obstacle

 

 

between them.

 

 

 

 

 

There is a microwave oven or other

Use the system in a place away from microwave ovens or

 

device generating electromagnetic

others device generating electromagnetic waves.

 

waves near the wireless LAN

 

 

Avoid using devices generating electromagnetic waves as

 

environment.

 

much as possible when using the system with the wireless

 

 

 

 

LAN.

 

 

 

 

Multiple wireless LAN converters

When connecting multiple wireless LAN converters, their IP

 

are connected to the wireless LAN

addresses must be changed.

 

router.

 

 

 

 

 

Wireless LAN connections cannot be

The wireless LAN converter must be set in order to establish

 

established between the wireless

wireless LAN connections. See Connecting using wireless

 

LAN converter and base unit

LAN on page 8.

 

(wireless LAN router, etc.).

 

 

 

 

Problem

Check

Remedy

Network cannot be

The IP address settings of the player

Check the IP address settings of the player and wireless

accessed via wireless

and wireless LAN converter do not

LAN converter (including the DHCP setting).

LAN.

match the settings of the wireless

If the player’s DHCP setting is on, turn the player’s power

 

LAN router, etc.

off, then turn the power back on.

 

 

Check that the IP address of the player and wireless LAN

 

 

converter matche the settings of the wireless LAN router,

 

 

etc.

 

 

If the player’s DHCP setting is off, set an IP address

 

 

matching the network of the base unit (wireless LAN router,

 

 

etc.).

 

 

For example, if the wireless LAN router’s IP address is

 

 

“192.168.1.1”, set the player’s IP address to “192.168.1.XXX”

 

 

(*1), the subnet mask to “255.255.255.0”, the gateway and

 

 

DNS to “192.168.1.1”.

 

 

Next, set the wireless LAN converter’s IP address to

 

 

“192.168.1.249” (*2).

 

 

(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2

 

 

and 248 that is not assigned to other devices.

 

 

(*2) Set the “249” in “192.168.1.249” to a number between 2

 

 

and 249 that is not assigned to other devices.

 

 

 

 

Try making the wireless LAN

The wireless LAN converter can be connected to a computer

 

converter’s advanced settings.

to make the advanced wireless LAN settings. For details, see

 

 

the CD-ROM included for the wireless LAN converter. Check

 

 

the settings of the wireless LAN router, etc., then change

 

 

the settings of the wireless LAN converter.

 

 

Note, however, that making the advanced wireless LAN

 

 

settings will not necessarily improve the wireless LAN

 

 

environment. Be careful when changing the settings.

 

 

 

 

The access point is set to conceal the

In this case, the SSID may not be displayed on the access

 

SSID.

point list screen. If not, set the SSID, etc., by making the

 

 

wireless LAN converter settings on the receiver manually.

 

 

 

 

The access point’s security settings

The player does not support WEP 152-bit length code key or

 

use WEP 152-bit length code key or

shared key authentication.

 

shared key authentication.

 

 

 

 

 

Network connections cannot be

Reset the wireless LAN converter. After this, redo the

 

established even when the above

wireless LAN converter’s settings.

 

measures are taken.

About resetting

 

 

1. Check that the wireless LAN converter’s power is on.

 

 

2. Press the wireless LAN converter’s reset button for at

 

 

least 3 seconds.

 

 

3. Release the reset button.

 

 

When the wireless LAN converter is restarted, the resetting

 

 

procedure is completed.

 

 

 

24

En