Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
•Start your volume control at a low setting.
•Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level Example
30 Quiet library, soft whispers
40Living room, refrigerator, bedroom away from traffic
50Light traffic, normal conversation, quiet office
60Air conditioner at 20 feet, sewing machine
70Vacuum cleaner, hair dryer, noisy restaurant
80Average city traffic, garbage disposals, alarm clock at two feet.
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE
90Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill 120 Rock band concert in front of speakers,
thunderclap
140Gunshot blast, jet plane
180Rocket launching pad
Information courtesy of the Deafness Research Foundation.
S001_En
Operating Environment
Operating environment temperature and humidity:
+5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)
WARNING
Before plugging in for the first time, read the following section carefully.
The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230V or 120V) written on the bottom panel.
If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the
The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when on vacation).
Contents |
|
CONFIRM ACCESSORIES | 4 |
CAUTIONS REGARDING HANDLING | 4 |
Location | 4 |
Cleaning the Unit | 4 |
Disclaimer | 4 |
About Copyright | 4 |
FEATURES | 4 |
NAMES AND FUNCTIONS OF PARTS | 6 |
CONNECTION PANEL | 6 |
OPERATION PANEL | 7 |
CONNECTIONS | 10 |
CONNECTING INPUTS | 10 |
CONNECTING OUTPUTS | 11 |
CONNECTING MICROPHONE AND HEADPHONES | 12 |
CONNECTING THE POWER CORD | 12 |
BASIC OPERATIONS | 13 |
FADER CURVE SELECTION | 14 |
USING THE VIDEO CONTROL FUNCTIONS | 15 |
OPERATING THE VIDEO CROSS FADER | 15 |
OPERATING THE VIDEO CHANNEL SWITCH | 15 |
OPERATING IN THE VIDEO SOLO MODE | 16 |
VIDEO MIX EFFECTS CHART | 16 |
USING THE EFFECT FUNCTION | 17 |
USING BEAT EFFECTS | 17 |
USING TOUCH EFFECTS | 19 |
USING TEXT EFFECTS | 20 |
EDITING TEXT | 22 |
DISPLAYING/HIDING THE MASTER MONITOR | 22 |
EFFECT LIST | 23 |
USING THE JPEG VIEWER | 31 |
BEFORE USING THE JPEG VIEWER | 31 |
JPEG VIEWER SETUP | 31 |
THE VIDEO EQUALIZER FUNCTION | 34 |
SET UP THE VIDEO EQ | 34 |
TURNING THE EQUALIZER ON/OFF | 34 |
FADER START FUNCTION | 35 |
CROSS FADER START PLAY AND BACK CUE PLAY | 35 |
PERFORM UTILITY SETUP | 36 |
MIDI SETTINGS | 36 |
SYNCHRONIZING AUDIO SIGNALS TO EXTERNAL |
|
SEQUENCER, OR USING |
|
OPERATE AN EXTERNAL SEQUENCER | 36 |
MIDI CODE LIST | 37 |
PERFORM VIDEO MONITOR SETUP | 41 |
KEYBOARD LANGUAGE SETUP | 41 |
HARDWARE SETUP | 42 |
MIC SETTING | 42 |
SYSTEM SETTINGS | 42 |
MASTER OUT SETTINGS | 43 |
LCD SETTINGS | 43 |
MONITOR OUT SETTINGS | 43 |
TOUCH PANEL SETTINGS | 44 |
RETURNING TO DEFAULT SETTINGS | 44 |
ENDING HARDWARE SET UP | 44 |
TROUBLESHOOTING | 45 |
ABOUT THE LCD SCREEN | 46 |
ABOUT MINIATURE FLUORESCENT TUBE TECHNOLOGY | 46 |
SPECIFICATIONS | 47 |
3
En
