CONNECTIONS
12
En
CONNECTING MICROPHONE AND HEADPHONES

Microphone

A microphone with XLR-type or Ø6.3 mm phone-type plug can be
connected to the MIC1 connector on the operation panel (upper) .
The MIC2 jack on the connection panel (rear) can be used to
connect a microphone with Ø6.3 mm phone-type plug.
• When using a microphone, set the operating panel’s MIC switch
to [ON] or [TALK OVER], and adjust the LEVEL dial as
necessary.
When not using a microphone, it is recommended to set the
MIC switch to [OFF] and rotate the LEVEL dial fully
counterclockwise to the [–∞] side.

Headphones

The PHONES jack on the operating panel (upper) can be used to
connect headphones with a Ø6.3 mm stereo phone plug.

External video connector

A camera, DVD player or other video output device can be
connected to the CH 1/CH 4 video input connectors on the
operating panel (top).
CONNECTING THE POWER CORD
Connect the power cord last.
When all connections are completed, connect one end of the
furnished power cord to the AC inlet on the rear panel, and the
plug on the other end to a household AC outlet, or the auxiliary
power outle t o n an am plifier. Use only the furnished power cord for
this connection.
USB
OUT
MIC2
MIDI
MIC
USB
CH 1
VIDEO
EX
CH 4
MIC 1
Microphone 1
Microphone 2
HEAD PHONES
CROSS FADER
ASSIGN
PROFESSIONAL S
O

SVM

-

9
8
7
6
5
4
3
2
1
0
A THRU B
0
MONOSPLIT STEREO
MIXING
PHONES
MASTER
CUE
LEVEL
Headphones
MIC
USB
CH 1
VIDEO
EX
CH 4
MIC 1
Video cameras and
devices
SVM-1000_B_En.book 12 ページ ２００７年１１月２６日　月曜日　午後１２時５４分