12The System Setup and Other Setup menus
inserted into the USB port on the receiver’s front panel contains updatable software. “Accessing” is displayed and the update file is checked. Wait a while.
3Check on the screen whether or not an update file was found.
If “New version found.” is displayed, the update file has been found. The version number and updating time are displayed.
If “This is the latest version. There is no need to update.” is displayed, no update file has been found.
4To update, select OK.
The updating screen appears and updating is performed.
!The power turns off automatically once updating is completed.
Software Update messages
Status | Descriptions | |
messages | ||
| ||
| No update file was found on the | |
NO UPDATE | USB memory device. Store the file | |
FILE | in the USB memory device’s root | |
| directory. | |
| Try disconnecting then reconnecting | |
| the USB device or storing the update | |
FILE ERROR | file again. If the error still occurs, | |
| try using a different USB memory | |
| device. | |
UPDATE | Turn the receiver’s power off, then | |
ERROR 1 | ||
turn it back on and try updating the | ||
to UPDATE | ||
software again. | ||
ERROR 7 | ||
| ||
| If this message flashes, updating | |
| has failed. Update via a USB mem- | |
Update via | ory device. Put the update file on a | |
USB memory device and connect | ||
USB | ||
the device to the USB port. When | ||
| ||
| the file is found, software updating | |
| starts automatically. | |
UE11 | Updating has failed. Use the same | |
UE22 | procedure to update the software | |
UE33 | again. | |
|
72En