13Additional information

HDMI

Symptom

Remedy

The HDMI indicator blinks

Check all the points below.

continuously.

 

No picture or sound.

This receiver is HDCP-compatible. Check that the components you are con-

 

necting are also HDCP-compatible. If they are not, please connect them using

 

the component or composite video jacks.

 

Depending on the connected source component, it’s possible that it will not

 

work with this receiver (even if it is HDCP-compatible). In this case, connect

 

using the component or composite video jacks between source and receiver.

SymptomRemedy

HDCP ERROR shows in the Check whether or not the connected component is compatible with HDCP. If

display.it is not compatible with HDCP, reconnect the source device using a different type of connection (component or composite). Some components that are compatible with HDCP still cause this message to be displayed, but so long as there is no problem with displaying video, this is not a malfunction.

When Control with HDMI is Even when Control with HDMI is set to ON, the HDMI input is assigned for set to ON, the TV/SAT input’s the BD, DVD, DVR/BDR and VIDEO inputs regardless of the Control with

HDMI Input assignment is HDMI setting, so use these terminals. canceled.

 

If the problem still persists when connecting your HDMI component directly to

 

your monitor, please consult the component or monitor manual or contact the

 

manufacturer for support.

 

If video images do not appear on your TV, try adjusting the resolution, Deep

 

Color or other setting for your component.

 

While analog video signals are being output over HDMI, use a separate con-

 

nection for audio output.

 

To output signals in Deep Color, use an HDMI cable (High Speed HDMI®

 

Cable) to connect this receiver to a component or TV with the Deep Color

 

feature.

No picture.

Try changing the Resolution setting (in Setting the Video options on page 50 ).

No sound, or sound suddenly

Check that the HDMI Audio setting is set to AMP (Setting the Audio options

ceases.

on page 48 ).

 

If the component is a DVI device, use a separate connection for the audio.

 

If analog video is being output over HDMI, please use a separate connection

 

for the audio.

 

Check the audio output settings of the source component.

 

HDMI format digital audio transmissions require a longer time to be rec-

 

ognized. Due to this, interruption in the audio may occur when switching

 

between audio formats or beginning playback.

 

Turning on/off the device connected to this unit’s HDMI OUT terminal during

 

playback, or disconnecting/connecting the HDMI cable during playback, may

 

cause noise or interrupted audio.

Noisy or distorted picture.

Sometimes a video deck may output a noisy video signal (during scanning, for

 

example), or the video quality may just be poor (with some video game units,

 

for example). The picture quality may also depend on the settings, etc. of your

 

display device. Switch off the video converter and reconnect the source and

 

display device using the same type of connection (component or composite),

 

then start playback again.

 

If the problem still persists when connecting your HDMI component directly to

 

your monitor, please consult the component or monitor manual or contact the

 

manufacturer for support.

Synchronized operation not possible using Control with HDMI function.

Check the HDMI connections.

The cable may be damaged.

Select ON for the Control with HDMI setting (see HDMI Setup on page 45 ).

Select ALL for the Control Mode with HDMI setting (see HDMI Setup on page 45 ).

Turn the TV’s power on before turning on this receiver’s power.

Set the TV side Control with HDMI setting to on (see TV’s operating instruc- tions).

78En