Additional information | 13 |
Symptoms | Causes | Remedies |
Symptoms | Causes | Remedies |
Audio playback is The audio file currently being undesirably stopped or played back was not recorded
disturbed. | in a format playable on this |
| receiver. |
Check whether the audio file was recorded in a format supported by this receiver.
Check whether the folder has been damaged or corrupted.
Note that there are cases where even the audio files listed as playable on this receiver cannot be played back or displayed (page 43).
Cannot listen to Inter- | The firewall settings for compo- | Check the firewall settings for components on the |
net radio stations. | nents on the network are cur- | network. |
| rently in operation. |
|
| You are currently disconnected | Check the connection settings for components on |
| from the Internet. | the network, and consult with your network service |
|
| provider if necessary (page 68). |
| The broadcasts from an Internet | There are cases where you cannot listen to some |
| The LAN cable is currently | Connect the LAN cable properly (page 22). |
| disconnected. |
|
| There is heavy traffic on the | Use |
| network with the Internet being | network. |
| accessed on the same network. |
|
| When in the DMR mode, | In this case, adjust the volume from the receiver or |
| depending on the external con- | remote control. |
| troller being used, playback may |
|
| be interrupted when a volume |
|
| operation is performed from the |
|
| controller. |
|
| There is a connection routed | There may be a shortage of bandwidth on the 2.4 |
| through a wireless LAN on the | GHz band used by the wireless LAN. Make wired |
| same network. | LAN connections not routed through a wireless |
|
| LAN. |
|
| Install away from any devices emitting electromag- |
|
| netic waves on the 2.4 GHz band (microwave ovens, |
|
| game consoles, etc.). If this does not solve the |
|
| problem, stop using other devices that emit electro- |
|
| magnetic waves. |
Cannot access | In case of Windows Media Player | Instead of logging onto the domain, log onto the |
Windows Media Player | 11: You are currently logged | local machine (page 40). |
11 or Windows Media | onto the domain through |
|
Player 12. | your PC with Windows XP or |
|
| Windows Vista installed. |
|
| In case of Windows Media Player |
|
| 12: You are currently logged |
|
| onto the domain through your |
|
| PC with Windows 7 installed. |
|
| radio station are stopped or | Internet radio stations even when they are listed |
| interrupted. | in the list of Internet radio stations on this receiver |
|
| (page 40). |
The Home Media Gal- | The remote control is not cur- | Press HMG to set the remote control to the Home |
lery cannot be operated | rently set to the Home Media | Media Gallery mode (page 40). |
with the buttons on the | Gallery mode. |
|
remote control. |
|
|
SIRIUS radio messages
Status messages | Causes | Remedy |
Antenna Error | The SIRIUS antenna is not | Check that the antenna cable is attached securely. |
| properly connected. |
|
Check Sirius Tuner | The SiriusConnectTM tuner is | Check that the 8 pin mini DIN cable and AC Adapter |
| not properly connected. | are attached securely. |
Acquiring Signal | The SIRIUS signal is too weak at | Check for antenna obstructions and reposition the |
| the current location. | SIRIUS antenna to get better signal reception. Use |
|
| the Antenna Aiming option to optimize the antenna |
|
| position. |
Subscription Updating | Unit is updating subscription. | Wait until the encryption code has been updated. |
Updating Channels | Unit is updating channels. | Wait until the encryption code has been updated. |
Invalid Channel | Selected channel is not avail- | Select another channel. |
| able/does not exist. |
|
Firmware Updating | The SiriusConnectTM tuner’s | Wait for updating to finish. |
| firmware is being updated. |
|
En 81