Pioneer S-EV1000V, XV-EV700, XV-EV1000 Listening to other sources, Improving FM stereo sound

04Getting started

•Manual tuning: Press TUNE +/– repeatedly to change the displayed frequency.

•Auto tuning: Press and hold TUNE +/– until the frequency display starts to move, then release. The tuner will stop on the next station it finds. Repeat to keep searching.

•High-speed tuning: Press and hold TUNE +/– until the frequency display starts to move rapidly. Keep the button held down until you reach the frequency you want. If necessary, fine tune the frequency using the manual tuning method.

Improving FM stereo sound

If you’re listening to an FM station in stereo but the reception is weak, you can improve the sound quality by switching to mono.

•Press MONO (SHIFT+5) to choose ‘FM MONO?’ then press ENTER.

The MONO indicator lights when the tuner is in mono reception mode.

Select FM AUTO? above to switch back to auto- stereo mode (the STEREO indicator lights when receiving a stereo broadcast).

Listening to other sources

You can connect an external source for playback through this system’s speakers. See Connecting auxiliary components on page 12 for more on this.

1Make sure that the external source (TV, MD player, etc.) is switched on.

2Press LINE to select the source connected to the rear panel LINE input.

3If necessary, start playback of the source.

Tip

•If an auxiliary source is producing unpleasant distortion from the speakers, you can reduce the signal level by switching on the attenuator. See Optional system settings on page 48 to do this.

22

En