Additional information

15

TV system setting

The default setting of this system is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you find picture distortion with some discs, set the TV system to match your country or region’s system. However, this may restrict the kinds of disc you can watch. See the table for the kinds of discs compatible with

each setting (AUTO, PAL and NTSC).1

After selecting TV SYS in step 3 above, press ENTER to change the TV system. The TV system as follows:

Disc / content format playback compatibility

This player is compatible with a wide range of disc types (media) and formats. Playable discs will generally feature one of the following logos on the disc and/or disc packaging. Note however that some disc types, such as recordable CD and DVD, may be in an unplayable format.

See the Disc compatibility table below for more information.

English Deutsch Français

AUTO

NTSC

NTSC

PAL

PAL

AUTO

The system automatically switches on and you’ll see the new TV system setting in the

display after seeing Welcome.2

Disc

 

Player setting

Type

Format

NTSC

PAL

AUTO

 

 

 

 

 

DVD/Super VCD/

NTSC

NTSC

PAL

NTSC

Video CD/DivX

PAL

NTSC

PAL

PAL

Video

 

 

 

 

 

 

 

 

 

CD/MP3/WMA/

NTSC

PAL

NTSC or

JPEG/no disc

 

 

 

PAL

 

 

 

 

 

Using and taking care of discs

DVD Video regions

All DVD Video discs carry a region mark that indicates which region(s) of the world the disc is compatible with. Your DVD system also has a region mark (on the rear panel). Discs from incompatible regions will not play in this player. Discs marked ALL play in any player.

DVD-Video DVD-R DVD-RW

Audio CD Video CD

CD-R

CD-RW

Fujicolor CD

is a trademark of Fuji Photo Film Co. Ltd.

is a trademark of DVD Format/Logo Licensing Corporation

Also compatible with KODAK Picture CD

This player supports the IEC’s Super VCD stan- dard for superior picture quality, dual soundtracks, and widescreen support.

VIDEO

CD

Super Video CD (Super VCD)

Italiano Nederlands Español

Note

1Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col- or. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen.

2 You have to switch the player into standby (press STANDBY/ON) before each change.

49

En

Page 49
Image 49
Pioneer XV-EV1000 Additional information, Disc / content format playback compatibility, Using and taking care of discs