Pioneer S-EV1000V Using the timer Chapter, Setting the wake-up timer, Setting the sleep timer

12Using the timer

Chapter 12

Using the timer

Important

•The clock must be set for the timers to work properly (see Setting the clock on page 19).

•You can check the timer settings in standby by pressing TIMER (SHIFT+6) twice.

Setting the wake-up timer

Use the wake-up timer to set the system to switch on at any time and start playing

whatever source you want. 1

1 Select the source you want played.

For example, press FM/AM to select the radio as your source.

2Prepare the source and set the volume. For example, tune in the radio station you want to wake up to. Adjust the volume as necessary.

3Press TIMER (SHIFT+6) twice, use

to select WAKE-UP then press ENTER.

Turning the wake-up timer on/off

If you have already set the wake-up timer, you can switch it on/off by selecting TIME ON or TIME OFF in step 4 above (press ENTER).

Setting the sleep timer

The sleep timer switches off the system after a specified time so you can fall asleep without

worrying about it.2

1Press TIMER (SHIFT+6) twice, use to select SLEEP then press ENTER.

2 Use (cursor up/down) to select a switch-off time then press ENTER.

Choose between the following options:

4	Use	to select EDIT then press
ENTER.
5	Set the switch-on time.
Use		to set the hour, then press ENTER.

Set the minute in the same way, pressing ENTER when you’re done.

6 Set the switch-off time.

Set as above, pressing ENTER when done. The WAKE-UPindicator lights, and the switch-on, switch-off times, the function (DVD/CD, etc.) and volume are confirmed in the display.

7Switch the system into standby mode. The wake-up timer will not work if the system is left on!

•AUTO– Switches off automatically after the currently playing CD or Video CD has finished.3

•SLEEP 90 – Switches off after 90 minutes

•SLEEP 60 – Switches off after an hour

•SLEEP 30 – Switches off after 30 minutes

•OFF – Cancels the sleep timer

3To check how much time is left, repeat step 1.

The remaining time is displayed momentarily.

Note

1You cannot have the wake-up timer and the record timer set at the same time.

2• If you set the sleep timer while either the wake-up or recording timer is active, the earlier switch off time takes priority.

• The system will switch into standby if you change the input function during AUTO sleep mode.

3 AUTO will not work with DVD/CDs in repeat play, cassette tapes, or Video CD/Super VCDs during PBC playback.

40

En