Before you start

Attaching the non-skid pads

EV700/1000 model only

Use the self-adhesive non-skid pads to provide a stable base for the speakers. Attach four to

each speaker or stand1 as shown below.

Center speaker

Surround speaker

Speaker stands

Removing the front speaker grilles

If necessary, remove the front speaker grilles as described below.

1Gently ease the grille loose by gripping the bottom and pulling towards you.

2Pull the top free in the same way.

When reattaching, start from the top then push the bottom in until secure.

It is not recommended (due to dirt and dust) to leave the speaker grilles removed.

Since the speaker grilles may come loose, make sure to place the speakers in a location where they will not cause injury.

01

English Deutsch Français Italiano Nederlands Español

Note

1If you choose to use the Front surround 3-spot setup (as explained in Home theater sound setup on page 23), it is necessary to use the speaker stands provided (do not attach the pads to the base of the surround speakers). Using the speaker stands for the Standard surround 5-spot setup is optional. See Attaching the surround speakers to the speaker stands on page 10 for more on this.

7

En

Page 7
Image 7
Pioneer XV-EV1000 Before you start Attaching the non-skid pads, Removing the front speaker grilles, EV700/1000 model only