Pioneer XV-EV1000, XV-EV700, S-EV500V DVD/CD/Video CD player, Problem Remedy, STANDBY/ON button

Additional information 15

Problem	Remedy
The microphone can’t be heard. • Stop the disc, then restart playback.
	• You are only using one microphone and it’s plugged into the MIC
	(SUB) jack. The MIC (SUB) jack can only be used if there is also a
	microphone plugged into the MIC (MAIN) jack.
	• Adjust the MIC VOL.
Feedback noise when mic is	• The mic is pointing toward the speakers. Keep the mic pointed
switched on.	away from the speakers.
	• The microphone level is set too high. Turn down the mic control
	level.
SND. DEMO shows in the	• Press and hold	(stop) on the front panel for about five seconds.
display and the unit can’t be	The disc tray ejects automatically to indicate the Sound Demo
controlled.	mode is disabled.
TRAYLOCK shows in the display	• Press and hold	(eject) on the front panel for about eight
and the tray can’t be ejected.	seconds. Then the tray can be opened/closed using (eject).

DVD/CD/Video CD player

Problem	Remedy
The disc is ejected automatically	• Clean the disc.
after loading.	• Align the disc properly in the disc guide.
	• If the region number on a DVD-video disc does not match the
	number on the player, the disc cannot be used (see DVD Video
	regions on page 49).
	• Allow time for any condensation inside the player to evaporate.
	Avoid using the player near an air-conditioning unit.
Playback is not possible.	• Disc may be loaded upside down. Reload the disc with the label
	side face up.
Picture playback stops and the	• Press , then start playback again ( ).
operation buttons cannot be	• Switch the power off once, then on again using the front panel
used.	STANDBY/ON button.
Settings are canceled.	• When the power is cut due to power failure or by unplugging the
	power cord for several days, settings will be canceled.
No picture/No color.	• Check that connections are correct and that plugs are inserted
	fully.
	• Check the instruction manual of the TV/monitor to make sure the
	TV/monitor settings are incorrect.
Screen is stretched or aspect	• The TV Screen setting is incorrect. Set the TV Screen option to
does not change.	match the TV/monitor you're using (see Video Output settings on
	page 44).
When recorded on a VCR or	• Due to the player’s copy protection circuits, connection of this
passed through an AV selector,	device through a VCR or an AV selector may prevent recording or
there is disturbance in the	cause picture problems. This is not a malfunction.
playback picture.

English Deutsch Français Italiano Nederlands Español

55

En