22 SV61228 Rev. A
W983 Stacker/W863 Dryer Operating Guide
Dryer Operation
The Dryer contains only one operator control, a power on/off switch
with an associated indicator. This switch is used to turn power to the
Dryer on or off. The switch will light when on.
Since the Dryer receives its power from a dedicated power outlet on
the associated Stacker, this switch will light (if set at on) only when
the power switch on the Stacker is switched on.
Therefore, when the power switch on the Dryer is left in the ON
position, the Dryer will activate only when the conveyor belts start to
move. This effectively causes the Dryer to operate only when needed
(when mailpieces are conveyed under it to be dried). When the
conveyor stops, the Dryer will automatically switch off.
IMPORTANT: Be sure to observe all labeled warnings and
precautions on Dryer (see below).
CAUTION:
Hot Surface
-Avoid Contact
CAUTION:Turn Power Off
When Not In Use. Only Operate
With Conveyor Moving.
CAUTION:
Keep air intake
vents free at all
times.
WARNING: Dryer will ignite
combustible materials. Keep
all items clear of this machine,
except envelopes specified for
use with this machine.
CAUTION: Disconnect
power before changing fuse. For
continued protection against risk
of fire, replace only with same
type and rating of fuse.
CAUTION:
Do not operate
unattended.
Stacker_Dryer Op Guide Book.indb 22Stacker_Dryer Op Guide Book.indb 22 3/30/2004 10:26:48 AM3/30/2004 10:26:48 AM