5SV61228 Rev. A
W983 Stacker/W863 Dryer Operating GuideW983 Power Stacker Controls and Indicators
Operator Panel
1 Power Switch - This is a rocker switch with indicator light. Press
the top in to turn the Stacker on. Press the bottom in to turn the
Stacker off.
2 Speed Adjustment Knob - To eliminate possible ink smudg ing
of the printed address, you can vary the speed of the conveyor
belts so that the mailpieces are separated (do not overlap) as
they are delivered to the belt. Turn clock wise to increase speed
and counterclockwise to decrease speed.
3 Auto/Manual Switch - This is a rocker switch. Press the top in
to select Au to mat ic mode. In automatic mode, the Stacker belts
will move when the printer is feeding mailpieces and stops the
printer when the Stacker is full. Press the bottom in to select
manual mode. In Manual mode, the Stacker runs con stant ly
(independent of the printer).
4 Stacker Full Light - This LED flashes when the Stacker ramp is
full.
4
1
2
3
Stacker_Dryer Op Guide Book.indb 5Stacker_Dryer Op Guide Book.indb 5 3/30/2004 10:26:43 AM3/30/2004 10:26:43 AM