W983 Stacker/W863 Dryer Operating Guide
Follow these steps to replace the fuse in the Dryer:
1.Turn the Dyer off and unplug the AC power cord from the Stacker outlet.
2.Using a small flat object or screwdriver, lift up the fuse holder by from its slot located directly above the AC input connector.
3.Remove blown fuse and insert replacement fuse, making sure it is the same type and rating.
4.Slide fuse holder back into slot.
5.Plug in the Dryer AC power cord back into the Stacker and turn the power on. If the blown fuse condition occurs again, call Pitney Bowes for service.
SV61228 Rev. A | 25 |
