W983 Stacker/W863 Dryer Operating Guide
Speed Control
The speed adjustment allows the proper amount of spacing between mailpieces. This value varies greatly depending on mailpiece size.
Stacker Job Setup
You will be required to check and make the following adjustments when you change from one job to another job.
Adjust Stacker Height and Distance
Depending on the mailpiece, you will have to adjust the height and distance of the Stacker in relation to the output of the printer.
CAUTION: The Stacker deck may rapidly drop to its lowest height when you loosen the Stacker height adjustment knob.
To adjust the height:
1Hold the Stacker steady with upright pressure and loosen the adjustment knob.
Adjustment
Knob
2Set the height to the recommended value (referenced from the top of the printer output roller) and tighten the knob. Refer to tables and graphs on pages
DA Series Printer | W983 Stacker with |
| W863 Dryer |
SV61228 Rev. A | 11 |
