W983 Stacker/W863 Dryer Operating Guide
Use the following charts to determine the indicated settings for the Stacker for various material lengths and thicknesses (where applicable).
Media Stop Setting
Media Stop Setting
Full Arm Fixture Setting
11
10
9
8
7
6
5
4
3
2
1
0
5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
Min. |
|
|
|
|
|
|
| Max. |
Material Length (in inches)
Full Arm Fixture Setting on Ramp
13
12
11
10
9
8
7
6
5
4
3
2
1
0
3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Material Length (in inches)
The top chart is used to determine the setting for the media stop dependent on the length of the material. The bottom chart is used to determine the setting for the full arm fixture dependent on the length of the material.
In order to use the charts:
1Measure the length of your material in inches.
2Go to the that length at the bottom of the chart and then up that line to where it intersects the drawn line on the chart.
3Follow a straight line to the left side of the chart from that intersect and that is the setting that should be used for that adjustment.
16 | SV61228 Rev. A |
