Installing an UltraRes Display on a Wall

Using the Kickstand Bracket

The kickstand bracket is used for service mode, without having to remove the display from the wall. Use the following instructions to put the display in service mode.

1Loosen the captive locking screws on both sides of the bottom mount.

2Pull the display out and then swing out the kickstand to hold it in place. The kickstand will nest into the kickstand bracket notch.

Service position - with kickstand supporting display

Planar UltraRes User Manual

29

Page 36
Image 36
Planar 020-1229-00A user manual Using the Kickstand Bracket