Planar 020-1229-00A user manual Reboot

Planar UltraRes Remote Monitoring Software

Monitoring software may not configure to the same network address after the system reboots.

4When you click Reset ALL to Factory Default, you receive the Confirm Factory Reset page. Click OK, Reset to Factory Defaults and Reboot if you are sure you want to reset ALL settings to the factory default.

5The top of each page shows the Planar logo, which is a link to http://www.planar.com. You can change this link to refer to any URL that you find useful by typing it into the Product ID Link box.

6To make this link live, click Change Product ID Link.

7In normal operations, Remote Monitoring polls the displays at a rate of one per second to look for user requests that have been made using the IR remote control and the on-screen menus. In some situations, this polling can have a noticeable performance impact. If you want to disable this polling, select the Disable polling for alert conditions checkbox. When you are finished, click Change Advanced Settings.

Reboot

Click Reboot now to reboot your system. The reboot takes about 90 seconds.

72 Planar UltraRes User Manual