6.Accept the default Program Folder. Click Next. The Setup windows will appear as the files are copied to your computer.

7.The installation will be stopped in 95% for a few seconds and a screen like the following will be displayed.

∙Click Browse. The Configure screen will search all the Print Server in your LAN.

∙Select the Print Server you want to use in the Print Server list.

Note: You can find the print server’s default name in the back panel as SCxxxxxx. It also represents the print server’s MAC address. For example, SC123456 shows its MAC address: 00-c0-02-12-34-56.

∙If you are using 3 ports Print Server, you can click “Select Device Port” to se- lect the port which your printer connect to.

∙Press “OK” to finish the installation.

Note: If the “Configure PrintServer” screen is not displayed, Press “Alt” + “Tab” to show it.

Figure 2: Printer Port Setup (Peer-to-peer Print Driver)

Page 19