Internet

The settings allow you to print via your mail server. You can also refer to the

Printing

Chapter 7 to install our IPP driver to your PC. Then you can print to the printer

 

via Internet connection.

SNMP

Configuration is only required if using Simple Network Management Pro-

 

tocol. See Chapter 7 for details.

Wireless

This Icon will be active if the selected device has the capability to serve

 

as a Wireless Station for your LAN. See Wireless Configuration in Chap-

 

ter 7 - Special Features for details.

Port

Logical port (printers) can be used in the NetWare and Unix environ-

 

ments.

Other Icons

Upgrade

Menu Equivalent: Main – Upgrade…

This option allows you to upgrade the firmware for the selected Print Server. Before using this option, you need to obtain the .BIN file for the firmware upgrade, and copy it to the same directory as Bi-Admin.

Refresh

Menu Equivalent: Main - Refresh

Select this icon to update the Print Server device listing after changing the name or IP Address.

Exit

Menu Equivalent: Main - Exit

Exit the Bi-Admin program. This does not save any changes you have made; you must Save to Device on each screen.

Menu Options

Status Menu

Device Info

Same as Device button.

 

Display all the configuration and status information about the

 

selected Print Server. The data is presented in a scrolling, read-

 

only window.

Port

Same as Port Status buttons.

InitDevice Menu

 

Attach Remote

This is used to connect to a Print Server device on another LAN

 

segment. If your LAN does not have a Router, ignore this option.

Connected

This option allows you to designate which LAN protocol will be

Protocol

used for communication between the selected device and this

 

application. You should select ONE protocol only.

Find

Use this option to use the IPX/SPX protocol to locate a Print

 

Server on the LAN. Simply enter the Default Name of the Print

 

Server you wish to locate. The Default Server Name is shown on

 

Page 37