Wireless Configuration
Wireless Models - FPS-2PUW, FPS-2PUWG
∙802.11 Ad Hoc mode - No Access Point is used, Wireless stations communicate directly with each other. This is the current standard.
∙Ad Hoc mode - No Access Point is used, Wireless stations communicate directly with each other. This is the older standard.
Of the two (2)
∙Infrastructure (Default) - All Wireless stations connect to the Access Point. This allows connection to both other Wireless stations and the wired LAN.
In "Infrastructure" mode, connecting a LAN cable will disable the
Wireless interface.
Required configuration
| Infrastructure Mode | |
|
|
|
SSID | Must match the other Wireless sta- | Must match the Access |
| tions, unless the SSID is null or | Point. |
| "any". |
|
| If its SSID is null or "any", a Wire- |
|
| less station can join any |
|
| group. |
|
| But since the |
|
| 2PUWG is fixed devices (rather |
|
| than roaming), their SSID should |
|
| not be null or "any". |
|
| It's recommended to assign value |
|
| to SSID for |
|
| 2PUWG. |
|
|
|
|
Channel | Should match the other Wireless | Access Point sets the Chan- |
| stations. | nel used. |
| However, when joining an existing | Wireless stations automati- |
| cally locate the correct chan- | |
| must use the Channel in use, rather | nel. |
| than its own Channel. |
|
| For a device like the Wireless Print |
|
| Server in a fixed location, it is best |
|
| to set them to the Channel provid- |
|
| ing the least interference and best |
|
|
| Page 62 |