Figure 9: System Configuration - Groups

Device List

On the right side of the screen is a list of all Print Servers found on the network. For each device, the following data is shown:

∙Default Name. The Default Server Name is shown on a sticker on the base of the device.

∙Device Name. If you have not changed the name, this will be the same as the Default Server Name.

∙Printer Port. The number and type of ports is shown in the right column.

If the desired Print Server is not listed, try the following:

∙Check that the device is installed and ON, then Refresh the list.

∙Use the Main - Refresh option to search for the Print Server. You need to know the Default Name of the Print Server. The Default Server Name is shown on a sticker on the base of the device.

∙If the Print Server is on another LAN segment, use the InitDevice - Attach Remote menu option to locate and display the Print Server.

∙For networks using ONLY TCP/IP, Print Servers without an IP Address will not appear. Use the InitDevice – Connected Protocol option and select other protocol to find out your printserver.

Page 34