Windows 2000, XP and Server 2003

1.Start the Add Printer Wizard, select Network Printer, then click Next to browse for the Print Server.

2.Locate and double-click the Print Server, select the desired port, and click Next. The following message will be displayed:

Figure 26: Windows 2000 Message

3.Click "OK", and select the correct Manufacturer and Model for this printer.

4.Follow the prompts to complete the installation.

5.In the Printers folder, right-click the new printer, and select Sharing.

∙Select "Shared As:" and enter an appropriate name for this printer. Users will see this name when browsing for the printer during installation.

∙If desired, click "Additional Drivers" and install printer drivers for other versions of Windows, such as Windows 98. This will assist users during the installation process.

6.Click OK to close this Window. Configuration is now complete.

Client PCs can now be configured as described in Chapter 4 - Client Configuration.

Novell NetWare

The FPS-5P-M/FPS-5P-S are fully support both Bindery and NDS Novell systems.

With either Bindery or NDS, two (2) NetWare operating modes are possible - Print Server and Remote Printer. Print Server mode is recommended.

Novell Distributed Printing Services (NDPS) under NetWare 5 is also supported.

Configuration Methods (Bindery or NDS)

The following configuration methods are available. In each case, you must be logged into the required NetWare Server with ADMIN rights.

Also, if using Windows, Novell's Client32 should be installed on your PC. Without Cli- ent32, only limited configuration changes can be made on the NetWare Server.

Setup Wizard

Using the Setup Wizard is recommended. This allows configuration of the Print Server in NetWare Print Server Mode, which is the recommended system.

Page 84