Access | Select the desired level of access. |
Trap Receivers |
|
|
|
Receiver No. | Select the Trap Receiver number (1..4), and click the Get Data |
| button to update the display for the selected item. |
IP Address | Enter the IP Address of the Trap Receiver, which will be sent |
| the Trap message. |
Community | This is a text field. Enter the name of the community. |
Enable | Check to enable; select the severity level. |
| Note: Currently, all traps are level 1. |
TCP/IP
| Figure 14: TCP/IP Screen |
|
|
IP Address | IP Address assigned to this device. If using dynamic IP Ad- |
| dresses (DHCP, BOOTP, rarp), this should be left at 0.0.0.0. |
Subnet Mask | If the Router (Gateway) Address is 0.0.0.0, the Subnet Mask |
(Network | should also be left at 0.0.0.0. If you have a router, enter the |
Mask) | Subnet mask for the segment to which the Print Server is at- |
| tached. |
Gateway Ad- | If your network segment has a router or gateways, enter its IP |
dress | Address here. Otherwise, leave the address as 0.0.0.0. |
Connection |
|
|
|
Delay before | Sets how long the Print Server should wait before retrying a |
reconnection | TCP/IP connection which is lost. Allowable values are from 0 to |
attempts | 255 seconds, with 2 as the default. |
Number of re- | Set how many attempts at reconnection will be made. After |
connection | that, the TCP/IP session will be terminated. |
attempts | Allowable values are from 0 to 255, with 254 as the default. |
| |
|
|
Page 45