Step 3.
Assign the IP pool for your DHCP server. Click Next.
For example:
If the LAN IP address is 192.168.0.1, the IP range of LAN is 192.168.0.2 to 192.168.0.51. The DHCP server assigns the IP form Start IP Address to End IP Address. The legal IP address range is form 0 to 255, but 0 are reserved as network name and 255 are reserved for broadcast. It implies the legal IP address range is from 1 to 254. That means you cannot assign an IP greater than 254 or less then 1.
Lease time 72 hours indicates that the DHCP server will reassign IP information in every 72 hours.
Step 4.
Enter Parameters in BASIC –
STEP4
Wan Parameters;
VPI: 0
VCI: 32
AAL5 Encapsulation: LLC
Protocol: IPoA , EoA , IPoA + NAT or EoA + NAT
Click Next to setup the IP parameters.
Step 5.
Enter Parameters in WAN setting.
1.IP Address: 10.1.2.1
2.Subnet mask: 255.255.255.0
3.Gateway: 10.1.2.2
Your ISP will provide above information to you.
4. DNS Server 1: 168.95.1.1 Your ISP will provide at least one
DNS Server IP address.
5.Click Next.
Step 6.
The screen will prompt the new configured parameters. Check the parameters and click Restart. The router will reboot with the new setting or press Continue to configure another parameters.
- 18-