GRT-501 G.SHDSL.bis Bridge Router User’s Manual
4.2.6 Route
If the GRT-501 is connected to more than one network, it may be necessary to set up a static route between them. A static route is a pre-determined pathway that network information must travel to reach a specific host or network.
With Dynamic Routing, you can enable the GRT-501 to automatically adjust to physical changes in the network’s layout. The Router, using the RIP protocol, determines the network packets’ route based on the fewest number of hops between the source and the destination. The RIP protocol regularly broadcasts routing information to other routers on the network.
Web UI Configuration
Step 1.
Click Route to modify the routing
information.
Step 2.
To modify the RIP (Routing information protocol) Parameters:
RIP Mode: Enable
Auto RIP Summary: Enable
Press Modify
