GRT-501 G.SHDSL.bis Bridge Router User’s Manual

Step 4.

Port-Based VLANs are VLANs where the packet forwarding decision is based on the destination MAC address and its associated port.

Click Port-Based VLAN to configure the router.

Step 5.

Press Finish to finish setting.

The screen will prompt the parameters that will be written in EPROM. Check the parameters before writing in

EPROM.

Press Restart to restart the router working with new parameters or press Continue to setup another parameter.

4.2.5 ETHERNET

This page of function let user configure the media type of Ethernet.

Web UI Configuration

Step 1.

Click ETHERNET to configure Ethernet.

Here are several options:

1.AutoSense

2.100Base-TX full duplex

3.100Base-TX helf duplex

4.10Base-T full duplex

5.10Base-T helf duplex

Step 2.

Press Finish to finish setting.

The screen will prompt the parameters that will be written in EPROM. Check the parameters before writing in

EPROM.

Press Restart to restart the router working with new parameters or press Continue to setup another parameter.

- 26-