Planet Technology GRT-501 31

GRT-501 G.SHDSL.bis Bridge Router User’s Manual

Step 1.

Press NAT/DMZ to setup the parameters.

If you want to enable the NAT/DMZ functions, click Enable. Enable the DMZ host Function is used the IP address assigned to the WAN for enabling DMZ function for the virtual IP address.

Multi-DMZ: Some users who have two or more global IP addresses assigned by ISP can be used the multi DMZ. The table is for the mapping of global IP address and virtual IP address.

Multi-NAT: Some of the virtual IP

addresses (eg: 192.168.0.10 ~ 192.168.0.50) collectively use two of the global IP addresses (eg: 69.210.1.9 and 69.210.1.10).

The Multi-NAT table will be setup as:

Virtual Start IP Address: 192.168.0.10

Count: 40

Global Start IP Address: 69.210.1.9

Count: 2

Press Finish to continue.

Step 2.

The screen will prompt the parameters that will be written in EPROM. Check the parameters before writing in

EPROM.

Press Restart to restart the router working with new parameters or Continue to configure another parameter.

- 30-

Contents

Page Copyright Disclaimer Trademarks CE mark Warning Federal Communication Commission Interference Statement FCC Caution: R&TTE Compliance Statement WEEE Caution Safety Customer Service Table of Contents Page Chapter 1 Overview Product Features Hardware Specification Package Contents 2.1 Get to know your G.SHDSL.bis Router 2.2 Rear Panel Connections 2.3 Setting up the hardware environment 3.1 Serial console 3.2 Telnet 3.3 Web browser Chapter 4 Configuration by Web Browser 4.1 Basic Setting 4.1.1 Bridge Mode Web UI Configuration Page 4.1.2 Routing Mode for PPPoA and PPPoE with IP Sharing Page 4.1.3 Routing Mode for IPoA or EoA Page 4.1.4 LAN-to-LANConnection with Bridge Mode STU-R(CO) side STU-C(CPE) side 4.2 Advanced Setup 4.2.1SHDSL.bis 4.2.2 WAN Page 4.2.3 Bridge 4.2.4 VLAN 4.2.5 ETHERNET 4.2.6 Route Page 4.2.7 NAT/DMZ Page 4.2.8 Virtual Server 4.3 Status 4.4 Administration 4.4.1 Security 4.4.2 SNMP Page 4.4.3 Time Sync Page 4.5 Utility 4.5.2 Config Tool 4.5.3 Upgrade 4.5.4 Logout 4.5.5 Restart Appendix A: VLAN Specification Frame Specification Applications 2.802.1Q VLAN 802.1Q VLAN Example Appendix B: Glossary DHCP (Dynamic Host Configuration Protocol) DMT Downstream rate DSLAM Dynamic IP Addresses HTML HTML browser http ICMP Internet address NAT NVT PAP PORT POTS Router Routing Table Routing Information Protocol SNMP SOCKET Subnet TCP TFTP Transparent bridging UDP Virtual Connection (VC)