GRT-501 G.SHDSL.bis Bridge Router User’s Manual

4.2 Advanced Setup

Advanced configuration contains SHDSL.bis, WAN, Bridge, VLAN, Ethernet, Route, NAT/DMZ and Virtual Server settings.

4.2.1SHDSL.bis

Web UI Configuration

Step 1.

You can setup the Annex type, data rate and SNR margin for SHDSL.bis parameters in SHDSL.bis.

Click SHDSL.bis

Step 2.

Annex Type: There are foure Annex types, Annex A (ANSI), Annex B (ETSI), AnnexAF and Annex BG in SHDSL.bis. Check with your ISP about it.

TCPAM Type: The default option is Auto. You may assign the different type manually by click the caption TPCAM-16 or TPCAM-32

Data Rate : you can setup the SHDSL.bis data rate in the multiple of 64kbps.

The default data rate is 5696Kbps (n=89).

Under Annex F/G

TCPAM32 : data rate is 768Kbps ~ 5696Kbps (Nx64kbps, N=12~89)

TCPAM16 : data rate is 192Kbps ~ 3840Kbps (Nx64kbps, N=3~60)

Under Annex A/B

TCPAM16 : 192Kbps ~ 2304Kbps (Nx 64kbps, N=3~36)

For adaptive mode, you have to setup n=0. The router will adapt the data rate according to the line status.

Step 3.

The screen will prompt the parameters that will be written in EPROM. Check the parameters before writing in EPROM.

Press Restart to restart the router working with new parameters or press Continue to setup another parameter.

- 21-