GRT-501 G.SHDSL.bis Bridge Router User’s Manual

4.2.3 Bridge

If you want to setup advanced filter function while GRT-501 is working in bridge mode, you can use BRIDGE menu to setup the filter function, blocking function.

Web UI Configuration

Step 1.

Click Bridge to start Bridge configuration.

Step 2.

Press Add in the bottom of web page to add the static bridge information.

If you want to filter the designated MAC address of LAN PC to access Internet, press Add to establish the filtering table. Put the MAC address in MAC Address field and select Filter in LAN field.

If you want to filter the designated MAC address of WAN PC to access LAN, press Add to establish the filtering table. Key the MAC address in MAC Address field and select Filter in WAN field.

For example:

If your VC is setup at WAN 1, select WAN 1 Filter.

Step 3.

Press Finish to finish setting.

The screen will prompt the parameters that will be written in EPROM. Check the parameters before writing in EPROM.

Press Restart to restart the router working with new parameters or press Continue to setup another parameter.

- 24-