Manuals / Brands / Computer Equipment / Network Router / Planet Technology / Computer Equipment / Network Router

Planet Technology GRT-501 4.4 Administration, 4.4.1 Security, telnet, Web browser, serial console, Web UI Configuration

1 51

Download 51 pages, 4.2 Mb

GRT-501 G.SHDSL.bis Bridge Router User’s Manual

4.4 Administration

This section introduces security and simple network management protocol (SNMP) and time synchronous.

4.4.1 Security

For system security, suggest to change the default user name and password in the first setup otherwise unauthorized persons can access the router and change the parameters.

There are three ways to configure the router, Web browser, telnet and serial console.

Web UI Configuration

Step 1.

Press Security to setup the parameters.

For greater security, change the Supervisor ID and password for the gateway. If you don’t set them, all users on your network can be able to access the gateway using the default IP and Password root.

You can authorize five legal users to access the router via telnet or console. There are two UI modes, menu driven mode and command mode to configure the router.

Legal address pool will setup the legal IP addresses from which authorized person can configure the gateway. This is the more secure function for network administrator to setup the legal address of configuration.

- 33-

Contents

Page Copyright Disclaimer Trademarks CE mark Warning Federal Communication Commission Interference Statement FCC Caution: R&TTE Compliance Statement WEEE Caution Safety Customer Service Table of Contents Page Chapter 1 Overview Product Features Hardware Specification Package Contents 2.1 Get to know your G.SHDSL.bis Router 2.2 Rear Panel Connections 2.3 Setting up the hardware environment 3.1 Serial console 3.2 Telnet 3.3 Web browser Chapter 4 Configuration by Web Browser 4.1 Basic Setting 4.1.1 Bridge Mode Web UI Configuration Page 4.1.2 Routing Mode for PPPoA and PPPoE with IP Sharing Page 4.1.3 Routing Mode for IPoA or EoA Page 4.1.4 LAN-to-LANConnection with Bridge Mode STU-R(CO) side STU-C(CPE) side 4.2 Advanced Setup 4.2.1SHDSL.bis 4.2.2 WAN Page 4.2.3 Bridge 4.2.4 VLAN 4.2.5 ETHERNET 4.2.6 Route Page 4.2.7 NAT/DMZ Page 4.2.8 Virtual Server 4.3 Status 4.4 Administration 4.4.1 Security 4.4.2 SNMP Page 4.4.3 Time Sync Page 4.5 Utility 4.5.2 Config Tool 4.5.3 Upgrade 4.5.4 Logout 4.5.5 Restart Appendix A: VLAN Specification Frame Specification Applications 2.802.1Q VLAN 802.1Q VLAN Example Appendix B: Glossary DHCP (Dynamic Host Configuration Protocol) DMT Downstream rate DSLAM Dynamic IP Addresses HTML HTML browser http ICMP Internet address NAT NVT PAP PORT POTS Router Routing Table Routing Information Protocol SNMP SOCKET Subnet TCP TFTP Transparent bridging UDP Virtual Connection (VC)