2.2 Install the GSW-1602SF/2404SF/2416SF

This section describes how to install your GSW-1602SF/GSW-2404SF/GSW-2416SF Web Smart Gigabit Ethernet Switch and make connections to the Switch. Please read the following topics and perform the procedures in the order being presented. PLANET GSW-1602SF/GSW-2404SF/GSW-2416SF Web Smart Gigabit Ethernet Switch do not need software configuration. To install your GSW-1602SF/GSW-2404SF/GSW-2416SF on a desktop or shelf, simply complete the following steps.

2.2.1 Desktop Installation

To install a GSW-1602SF/GSW-2404SF/GSW-2416SF on a desktop or shelf, simply complete the following steps:

Step1: Attach the rubber feet to the recessed areas on the bottom of the Switch.

Step2: Place the GSW-1602SF/GSW-2404SF/GSW-2416SF on a desktop or shelf near an AC power source.

Step3: Keep enough ventilation space between the Switch and the surrounding objects.

#When choosing a location, please keep in mind the environmental restrictions discussed in Chapter Note: 1, Section 4, and Specification.

Step4: Connect your GSW-1602SF/GSW-2404SF/GSW-2416SF to network devices.

A.Connect one end of a standard network cable to the 10/100/1000 RJ-45 ports on the front of the GSW-1602SF/GSW-2404SF/GSW-2416SF

B.Connect the other end of the cable to the network devices such as printer servers, workstations or routers…etc.

#Connection to the Switch requires UTP Category 5 network cabling with RJ-45 tips. For more

Note: information, please see the Cabling Specification in Appendix A.

Step5: Supply power to the Switch.

A.Connect one end of the power cable to the GSW-1602SF/GSW-2404SF/GSW-2416SF.

B.Connect the power plug of the power cable to a standard wall outlet.

When the GSW-1602SF/GSW-2404SF/GSW-2416SF receives power, the Power LED should remain solid Green.

2.2.2 Rack Mounting

To install the switch in a 19-inchstandard rack, follow the instructions described below.

Step1: Place your GSW-1602SF/GSW-2404SF/GSW-2416SF on a hard flat surface, with the front panel positioned towards your front side.

Step2: Attach a rack-mount bracket to each side of the Switch with supplied screws attached to the package. Figure 2-8 shows how to attach brackets to one side of the Switch.

Figure 2-8Attaching the brackets to the Switch

-7-