As show in Figure 4-8 and Figure 4-9

Figure 4-8Add a VLAN screen

Figure 4-9VLAN Member Setup screen

4.6.1.2 Modify the VLAN Group Member

Once you want to modify the existence VLAN Group member or delete a existence VLAN Group. Refer to the following steps.

1.To modify the members of an existence VLAN Group, check the VLAN Group ID and press “Modify” button. the ID VLAN Setup screen will pop out.

2.To add/remove a port from specific VLAN group, just check/cancel the Member check Box and press “Apply” to take affect.

3.To delete an existence VLAN Group, check the VLAN Group ID and press “Delete” button.

As show in Figure 4-10appears.

-22-