Backpressure is enabled on Half-Duplex mode.

 

 

• Disable – No flow control or backpressure function on no matter

 

 

Full-Duplex or Half-Duplex mode

• Ingress Rate Limit

 

The value of inbound traffic limitation in kilobit-per-second (kbps). Per port in step

 

 

of 128 kbps.

 

 

Default : No Limit

 

 

The range between 128 Kbps to 3968 kbps.

 

 

 

• Egress Shaping

 

The value of outbound traffic limitation in kilobit-per-second (kbps). Per port in

 

 

step of 128 kbps.

 

 

Default : No Limit

 

 

The range between 128 Kbps to 3968 kbps.

 

 

 

• Port Description

 

Make a brief description for the port to help network manager identify the device

 

 

connected to it.

 

 

Maximum Length : 8 characters

 

 

For example, label it as “VoIP Phone” if an VoIP Phone is connected to this port.

 

 

 

 

Table 4-3Description of the Port Configuration

#Note: When set each port to run at 100M Full, 100M Half, 10M Full, and 10M Half-speed modes. The Auto-MDIX function will disable.

-17-