• Item | Description |
|
|
• VLAN Type - | There’re two VLAN mode support – 802.1Q VLAN and |
| • 802.1Q – Packets income will be tagged with VID as the PVID setting. All ports |
| on the switch belong to default VLAN (VID 1). |
| • |
| same VLAN group. Note all unselected ports are treated as belonging to the |
| default system VLAN. |
| If |
|
|
• Port - | Select the physical interface for which you want to display or configure data. |
|
|
• Link Type - | Allow 802.1Q Untagged or Tagged VLAN for selected port. |
| When adding a VLAN to selected port, it tells the switch whether to keep or |
| remove the tag from a frame on egress. |
| • Untag: outgoing frames without |
| • Tagged: outgoing frames with |
|
|
• Ingress Filtering | Enabled - the frame is discarded if this port is not a member of the VLAN with |
Enable- | which this frame is associated. In a tagged frame, the VLAN is identified by the |
| VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID specified |
| for the port that received this frame. |
| Disabled - all frames are forwarded in accordance with the 802.1Q VLAN bridge |
| specification. The factory default is disabled. |
|
|
• Acceptable Frame | Specifies the types of frames that may be received on this port. The options are |
Types - | 'All' and 'Tagged only'. |
| • All- untagged frames or priority tagged frames received on this port are |
| accepted and assigned the value of the Port VLAN ID for this port. |
| • Tagged only - untagged frames or priority tagged frames received on this port |
| are discarded. |
| With either option, VLAN tagged frames are forwarded in accordance to the |
| 802.1Q VLAN specification. |
|
|
• PVID - | Allow assign PVID for selected port. The range for the PVID is |
| The PVID will be inserted into all untagged frames entering the ingress port. The |
| PVID must as same as the VLAN ID that the port belong to VLAN group, or the |
| untagged traffic will be dropped. |
|
|
Table