4.12 Filter Configuration
The
Figure
The Filter Configuration page includes the following fields: Table
• | Item | Description |
|
|
|
• | Port | Indicate port 1 to port 24 for the IP Filter setting. |
|
|
|
• | Mode | To “Enabled” or “Disabled” the IP Filter on the selected port. If “Enabled” be |
|
| selected, the next two fields are allowed to be configured. Press “Apply” to active |
|
| the IP Filter setting on the port. |
|
|
|
• | IP Address | This input field allows the user to enter the “Source IP network address” to be |
|
| filtered on the selected port. This field has to |
|
|
|
• | IP Mask | This input field allows the user to enter the “IP Mask” of the Source IP address to |
|
| be filtered on the selected port. |
|
|
|
• | DHCP Server | To allow the ICMP DHCP request and reply packets be pass through the port |
| Allowed | even the IP address of the DHCP server inside the range of the Filter list. |
|
|
|
|
| Table |