The MAC Address Table includes the following fields: Table 4-28 Description of the Static MAC Address.

•

Item

Description

 

 

 

•

VID

The VLAN ID attached to the MAC Address

 

 

 

•

Ports

Specifies the port numbers for which the table is queried.

 

 

 

•

Type

Static - Static addresses are manually configured. Packets received with the

 

 

destinated MAC address mathch the port static MAC setting will be forward to the

 

 

specify port.

 

 

 

•

MAC-Address

The MAC address listed in the current static address list.

 

 

 

 

 

Table 4-28 Description of the Static MAC Address

4.14 Tools

4.14.1 Reboot

The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user has to re-login the WEB interface about 20 seconds later. The Reboot screen in Figure 4-51 appears.

Figure 4-51Reboot screen

4.14.2 Factory Reset

The Factory Reset button can reset the GSW-1602SF/GSW-2404SF/GSW-2416SF back to the factory default mode. Be aware that the entire configuration will be reset; expect the IP address of the GSW-1602SF/GSW-2404SF/GSW-2416SF. Once the Factory Reset item is pressed, the screen in Figure 4-52 appears.

Figure 4-52Factory Reset screen

"To reset the IP address to the default IP Address “192.168.0.100”. Press the hardware reset button

Note: at the front panel about 5 seconds. After the device be rebooted. You can login the management WEB interface within the same subnet of 192.168.0.xx.

-61-