System Description |
| Defines the |
|
|
|
Password - |
| This function provides administrator to secure Web login |
|
|
|
Inactivity Timeout – |
| Specifies a time period for the user login. The web interface will be auto logout if |
|
| there’re no actions from the login user. |
|
| The default value is 300 seconds; 0 means no inactivity time limit. |
|
|
|
SNMP Enable – |
| Enable or Disable the SNMP function of the device. While set to enable, the |
|
| manager could remotely get the interface status and received the traps |
|
| information. |
|
|
|
SNMP Trap |
| The Trap function enables the Switch to monitor the Trap through the Web Switch |
destination – |
| Utility, set the Trap IP Address of the manager workstation where the trap to be |
|
| sent |
|
|
|
SNMP Read |
| Functions as a password and used to authenticate the access right of the device. |
Community – |
| The Read Community is restricted to |
|
| community table, for which there is no access. |
|
|
|
SNMP write |
| Functions as a password and used to authenticate the access right of the device. |
Community – |
| The Write Community accesses the device both read and write - configure to the |
|
| device via SNMP. |
|
|
|
SNMP Trap |
| Identifies the community string of the trap manager |
Community – |
|
|
|
|
|
| Table |
#After change the default password, if you forget the password. Please press 5 seconds and release
Note: the “Reset” button in the front panel of