- 7 -
2.1.2 LEDs of WGSW-2402A
The LEDs indicate the status of 10/100 Mbps Ethernet ports, Over Heat, Fan Failure and Power. Figure
2-2 shows the LED panel of the Switch. Table 2-2 shows the functions of power and status LEDs. Table
2-3 shows the functions of the port status LEDs.
FIGURE 2-2 LEDS PANEL
Status LED 10/100 Port Status LEDs
Power LED
The LEDs are explained in the following tables.
TABLE 2-2 POWER AND STATUS LEDS
LED Color Function
PWR Green Lights to indicate that the Switch has power.
Over Heat Red Lights to indicate that the Switch exceeds its operational
temperature.
Fan Failure Red Lights to indicate that the fans are not active.
TABLE 2-3 PORT STATUS LEDS
LED Color Function
Link/Act Green
Lights to indicate that the Switch is successfully
connecting to the network.
Blinks to indicate the Switch is actively receiving or
sending the data over the port.
100/10 Green
Lights to indicate that the port is operating at 100 Mbps.
Off to indicate that the port is operating at 10 Mbps while
the port’s Link is on.