- 214 -
Changing SNMP Parameters”.
Other Protocols — lets you view and change GVRP and IGMP settings. See section 7.10
“Configuring GVRP and IGMP”.
Port Trunking — lets you assign a range of ports to a trunk groups. See section 7.11
“Associating Ports to Trunk Groups”.
QoS — lets you to configure the Switch to use various Quality of Service (QoS) parameters. See
section 7.12 “Setting QoS Parameters”.
Stacking — lets you enable or disable stacking and select various stacking parameters. See
section 7.13 “Selecting Stacking Settings”.
Port Mirroring — lets you mirror one port to another. See section 7.14 “Port Mirroring”.
To access the MAC address management parameters, point to Advanced Setup and point to MAC
Address Management. The options in Figure 7-2 appear.
FIGURE 7-2 MAC ADDRESS MANAGEMENT OPTIONS
The MAC Address Management options let you view the Switch from the three perspectives:
Per VLAN View — see section 7.1.1 “Per VLAN View”.
Per Port View — see section 7.1.2 “Per Port View”.
Individual MAC View — see section 7.1.3 “Individual MAC View”.
These three views allow a network administrator to manage and monitor VLANs and their associated